Connection method of hydraulic hose

Ensuring the sealing between hydraulic hose connectors and other equipment is the most crucial step when matching them. Let's take a brief look below:

1. Sealing method for connecting hydraulic hose joints and rubber hoses - The internal and external threads of the quick connector can only be connected to the rubber hose after using a transition joint or adapter.

2. Sealing method for connecting hydraulic hose joints and rubber hoses - Regardless of the variety of rubber hose joints, the selection of transition joints should be based on the type of rubber hose joint. If the rubber hose is a regular water pipe, then a transition joint should be used, with one inner tooth at one end and one end inserted into the water pipe, and then fixed with a hose clamp. If both ends of the rubber hose are internally toothed, then it needs to be connected to a transition joint, with one inner tooth and one outer tooth. If the two ends of the rubber hose are external teeth, it should be connected directly to the transition joint and the internal teeth.

3. Sealing method for connecting hydraulic hose joints and rubber hoses - Generally, hydraulic quick change joints need to be high-pressure resistant. Therefore, in most cases, high-pressure oil pipes are used, and the two ends of the oil pipes are mostly made with internal teeth. Therefore, it should be possible to directly connect them.

4. Sealing method for connecting hydraulic hose joints and rubber hoses - As for hydraulic joints, other rubber rings are not used for sealing, and the product itself is concave at one end and convex at the other end, which can be completely sealed after connection.